Pilot TCAS RA compliance tool

Select the ACAS version on the aircraft by clicking on either the “TCAS V7.0”, “TCAS V7.1”, or “ACAS Xa CP1”
Initial RA

Aural

Select the RA sense: upwards or downwards.
Select the RA strength (type) from the pulldown menu.
Aircraft vertical rate:
fpm
Specify the aircraft vertical rate in fpm (ft/min.) at the time when the RA was issued. Precede the number with a minus sign (-) for descent rates.
RA required rate:
fpm
If the RA requires a specific vertical rate (e.g. Maintain Vertical Speed) enter the rate in fpm (ft/min.). Precede the number with a minus sign (-) for descent rates.
Evaluation 1
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. \n Precede the number with a minus sign (-) for descent rates.
Compliance
Evaluation 2
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. Precede the number with a minus sign (-) for descent rates.
Compliance
Evaluation 3
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. Precede the number with a minus sign (-) for descent rates.
Compliance
Select the ACAS version on the aircraft by clicking on either the “TCAS V7.0”, “TCAS V7.1”, or “ACAS Xa CP1”
Subsequent RA

Aural

Select the RA sense: upwards or downwards.
Select the RA strength (type) from the pulldown menu.
Aircraft vertical rate:
fpm
Specify the aircraft vertical rate in fpm (ft/min.) at the time when the RA was issued. Precede the number with a minus sign (-) for descent rates.
RA required rate:
fpm
If the RA requires a specific vertical rate (e.g. Maintain Vertical Speed) enter the rate in fpm (ft/min.). Precede the number with a minus sign (-) for descent rates.
Evaluation 1
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when the subsequent RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. Precede the number with a minus sign (-) for descent rates.
Compliance
Evaluation 2
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. Precede the number with a minus sign (-) for descent rates.
Compliance
Evaluation 3
Time of evaluation:
seconds
Enter the time at which the compliance should be assessed, in seconds after the time when RA was issued.
Achieved vertical rate:
fpm
Enter the vertical rate in fpm (ft/min.) which was achieved at the time which is assessed. Precede the number with a minus sign (-) for descent rates.
Compliance

Questions or comments? See the Disclaimer for contact information.

SKYbrary Partners:

Safety knowledge contributed by: